R2511-HP MSR Router Series IP Multicast Command Reference(V5)

94
undo pim triggered-hello-delay
Default
The maximum delay for sending a hello message is 5 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies the maximum delay in seconds for sending a hello message. The value range is 1 to
5.
Examples
# Set the maximum delay for sending a hello message to 3 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim triggered-hello-delay 3
probe-interval (PIM view)
Use probe-interval to configure the register probe time.
Use undo probe-interval to restore the default.
Syntax
probe-interval interval
undo probe-interval
Default
The register probe time is 5 seconds.
Views
Public network PIM view, VPN instance PIM view
Default command level
2: System level
Parameters
interval: Specifies a register probe time in seconds, in the range of 1 to 1799.
Examples
# Set the register probe time to 6 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] probe-interval 6
# Set the register probe time to 6 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] probe-interval 6