R2511-HP MSR Router Series IP Multicast Command Reference(V5)

109
Multicast routing and forwarding configuration
commands
delete ip rpf-route-static
Use delete ip rpf-route-static to delete all static multicast routes.
Syntax
delete ip rpf-route-static [ vpn-instance vpn-instance-name ]
Views
System view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If this option is not specified, the command deletes all static multicast routes on the public
network.
Examples
# Delete all static multicast routes on the public network.
<Sysname> system-view
[Sysname] delete ip rpf-route-static
This will erase all multicast static routes and their configurations, you must reconfigure
all static routes
Are you sure?[Y/N]:
Related commands
ip rpf-route-static
display multicast boundary
Use display multicast boundary to display multicast boundary information on the specified interfaces.
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] boundary [ group-address [ mask |
mask-length ] ] [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level