R2511-HP MSR Router Series IP Multicast Command Reference(V5)

114
Related commands
• display multicast routing-table
• multicast forwarding-table downstream-limit
• multicast forwarding-table route-limit
display multicast forwarding-table df-info
Use display multicast forwarding-table df-info to display the DF information of the multicast forwarding
table.
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] forwarding-table df-info
[ rp-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
rp-address: RP address of BIDIR-PIM.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the DF information for the
public network.
Examples
# Display the DF information of the multicast forwarding table for the public network.
<Sysname> display multicast forwarding-table df-info
Multicast DF information of VPN-Instance: public net
Total 1 RP
Total 1 RP matched
00001. RP Address: 1.1.1.1
MID: 0, Flags: 0x2100000:0
Uptime: 00:08:32
RPF interface: Ethernet1/1