R2511-HP MSR Router Series IP Multicast Command Reference(V5)

115
List of 1 DF interfaces:
1: Ethernet1/2
Table 26 Command output
Field Descri
p
tion
Multicast DF information of
VPN-Instance: public net
DF information of the multicast forwarding table for the public network.
Total 1 RP Total number of RPs.
Total 1 RP matched Total number of matched RPs.
00001 Sequence number of the RP.
MID ID of the RP. Each RP has a unique MID.
Flags
Current state of the RP. Different bits indicate different states of an RP. For major
values of this field, see Table 24 and Table 25.
Uptime Length of time for which the RP has been up, in the format hh:mm:ss.
RPF interface RPF interface to the RP.
List of 1 DF interfaces DF interface list.
display multicast minimum-ttl
Use display multicast minimum-ttl to display the minimum TTL required for a multicast packet to be
forwarded on the specified interface or all interfaces.
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] minimum-ttl [ interface-type
interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays the minimum time-to-live (TTL) required for a multicast packet to be
forwarded on all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.