R2511-HP MSR Router Series IP Multicast Command Reference(V5)

125
multicast forwarding-table downstream-limit
Use multicast forwarding-table downstream-limit to configure the maximum number of downstream
nodes for a single entry in the multicast forwarding table.
Use undo multicast forwarding-table downstream-limit to restore the default.
Syntax
multicast forwarding-table downstream-limit limit
undo multicast forwarding-table downstream-limit
Default
The maximum number of downstream nodes for a single multicast forwarding entry is 128.
Views
System view, VPN instance view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of downstream nodes (namely, the maximum number of outgoing
interfaces) for a single multicast forwarding entry. The value range is 0 to 128.
Examples
# Set the maximum number of downstream nodes for a single multicast forwarding entry on the public
network to 120.
<Sysname> system-view
[Sysname] multicast forwarding-table downstream-limit 120
# Set the maximum number of downstream nodes for a single multicast forwarding entry in VPN instance
mvpn to 60.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast forwarding-table downstream-limit 60
Related commands
display multicast forwarding-table
multicast forwarding-table route-limit
Use multicast forwarding-table route-limit to configure the maximum number of entries in the multicast
forwarding table.
Use undo multicast forwarding-table route-limit to restore the maximum number of entries in the
multicast forwarding table to the system default.
Syntax
multicast forwarding-table route-limit limit
undo multicast forwarding-table route-limit