R2511-HP MSR Router Series IP Multicast Command Reference(V5)

126
Default
The maximum number of entries in the multicast forwarding table is the maximum number allowed by the
system.
Views
System view, VPN instance view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of entries in the multicast forwarding table. The value range is 0 to
the maximum allowable number.
Usage guidelines
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR100
0
multicast
forwarding-table
route-limit
Value
range for
limit: 0 to
256
(default).
Value
range for
limit: 0 to
256
(default).
Value
range for
limit: 0 to
256
(default).
Value
range for
limit: 0 to
256
(default).
Value
range for
limit: 0 to
512
(default).
Value
range for
limit: 0 to
1024
(default).
Value
range for
limit: 0 to
900
(default).
Examples
# Set the maximum number of entries in the multicast forwarding table on the public network to 200.
<Sysname> system-view
[Sysname] multicast forwarding-table route-limit 200
# Set the maximum number of entries in the multicast forwarding table in VPN instance mvpn to 200.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast forwarding-table route-limit 200
Related commands
display multicast forwarding-table
multicast load-splitting
Use multicast load-splitting to enable load splitting of multicast traffic.
Use undo multicast load-splitting to disable load splitting of multicast traffic.
Syntax
multicast load-splitting { source | source-group }
undo multicast load-splitting
Default
Load splitting of multicast traffic is disabled.