R2511-HP MSR Router Series IP Multicast Command Reference(V5)
131
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the routing entries, where the incoming interface is the specified register interface of
PIM-SM.
all: Specifies all routing entries from the multicast routing table.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the information on the public
network.
When a routing entry is deleted from the multicast routing table, the corresponding forwarding entry is
also deleted from the multicast forwarding table.
Examples
# Clear the route entries related to multicast group 225.5.4.3 from the multicast routing table on the
public network.
<Sysname> reset multicast routing-table 225.5.4.3
# Clear the route entries related to multicast group 226.1.2.3 from the multicast routing table in VPN
instance mvpn.
<Sysname> reset multicast vpn-instance mvpn routing-table 226.1.2.3
Related commands
• display multicast forwarding-table
• display multicast routing-table
• reset multicast forwarding-table