R2511-HP MSR Router Series IP Multicast Command Reference(V5)

133
Attribute: Host Port
Host port(s):total 1 port(s).
Eth1/2 (D) ( 00:03:23 )
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port(s).
Eth1/2
Table 32 Command output
Field Description
Total 1 IP Group(s). Total number of IP multicast groups.
Total 1 IP Source(s). Total number of multicast sources.
Total 1 MAC Group(s). Total number of MAC multicast groups.
Port flags: D-Dynamic port, S-Static
port, C-Copy port, P-PIM port
Port flags:
• D—Dynamic port.
• S—Static port.
• C—Port copied from a (*, G) entry to an (S, G) entry.
• P—Port added by PIM snooping.
Subvlan flags: R-Real VLAN,
C-Copy VLAN
Sub-VLAN flags: R for real egress sub-VLAN under the current entry, C for
sub-VLAN copied from a (*, G) entry to an (S, G) entry.
Router port(s) Number of router ports.
( 00:01:30 )
Remaining time of the aging timer for the dynamic member port or router
port.
IP group address Address of IP multicast group.
(0.0.0.0, 224.1.1.1) An (S, G) entry, where "0.0.0.0" implies any multicast source.
MAC group address Address of MAC multicast group.
Attribute Attribute of IP multicast group.
Host port(s) Number of member ports.
display igmp-snooping host
Use display igmp-snooping host to display information about the hosts tracked by IGMP snooping.
Syntax
display igmp-snooping host vlan vlan-id group group-address [ source source-address ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.