R2511-HP MSR Router Series IP Multicast Command Reference(V5)

162
[Sysname] igmp-snooping
[Sysname-igmp-snooping] last-member-query-interval 3
Related commands
igmp-snooping last-member-query-interval
max-response-time (IGMP-snooping view)
Use max-response-time to set the global maximum response delay for IGMP general queries.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval
undo max-response-time
Default
The default setting is 10 seconds.
Views
IGMP-snooping view
Default command level
2: System level
Parameters
interval: Sets the maximum response delay in seconds for IGMP general queries. The value range is 1 to
25.
Examples
# Set the global maximum response delay for IGMP general queries to 5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] max-response-time 5
Related commands
• igmp-snooping max-response-time
• igmp-snooping query-interval
overflow-replace (IGMP-snooping view)
Use overflow-replace to enable the multicast group replacement function globally.
Use undo overflow-replace to disable the multicast group replacement function globally.
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
Default
The multicast group replacement function is disabled.