R2511-HP MSR Router Series IP Multicast Command Reference(V5)

164
reset igmp-snooping group
Use reset igmp-snooping group to remove the dynamic group entries for the specified IGMP snooping
groups.
Syntax
reset igmp-snooping group { group-address | all } [ vlan vlan-id ]
Views
User view
Default command level
2: System level
Parameters
group-address: Specifies an IGMP snooping group. The value range of group-address is 224.0.1.0 to
239.255.255.255.
all: Specifies all IGMP snooping groups.
vlan vlan-id: Specifies a VLAN. The value range of vlan-id is 1 to 4094.
Usage guidelines
This command cannot remove the static group entries for IGMP snooping groups.
Examples
# Remove the dynamic group entries for all IGMP snooping groups.
<Sysname> reset igmp-snooping group all
reset igmp-snooping statistics
Use reset igmp-snooping statistics to clear statistics for the IGMP messages learned through IGMP
snooping.
Syntax
reset igmp-snooping statistics
Views
User view
Default command level
2: System level
Examples
# Clear the statistics for all IGMP messages learned through IGMP snooping.
<Sysname> reset igmp-snooping statistics
router-aging-time (IGMP-snooping view)
Use router-aging-time to set the aging timer for the dynamic router ports globally.
Use undo router-aging-time to restore the default.