R2511-HP MSR Router Series IP Multicast Command Reference(V5)

171
Field Descri
p
tion
Up/Down time Length of time since the MSDP peer connection was established/failed.
Connection interface
Interface and its IP address used for setting up a TCP connection with the
remote MSDP peer.
Number of sent/received
messages
Number of SA messages sent and received through this connection.
Number of discarded output
messages
Number of discarded outgoing messages.
Elapsed time since last connection
or counters clear
Time passed since the information of the MSDP peer was last cleared.
Information about (Source,
Group)-based SA filtering policy
SA message filtering list information:
• Import policy—Filter list for receiving SA messages from the specified
MSDP peer.
• Export policy—Filter list for forwarding SA messages from the
specified MSDP peer.
Information about SA-Requests
SA request information:
• Policy to accept SA request messages—Filtering rule for receiving or
forwarding SA messages from the specified MSDP peer.
• Sending SA requests status—Whether enabled to send an SA request
message to the designated MSDP peer after receiving a new join
message.
Minimum TTL to forward SA with
encapsulated data
Minimum TTL of multicast packet encapsulated in SA messages.
SAs learned from this peer Number of cached (S, G) entries learned from this MSDP peer.
SA-cache maximum for the peer
Maximum number of (S, G) entries learned from this MSDP peer that the
device can cache.
Input queue size Data size cached in the input queue.
Output queue size Data size cached in the output queue.
Counters for MSDP message
MSDP peer statistics:
• Count of RPF check failure—Number of SA messages discarded
because of RPF check failure.
• Incoming/outgoing SA messages—Number of SA messages received
and sent.
• Incoming/outgoing SA requests—Number of SA requests received
and sent.
• Incoming/outgoing SA responses—Number of SA responses received
and sent.
• Incoming/outgoing data packets—Number of received and sent SA
messages encapsulated with multicast data.
Related commands
• peer connect-interface
• peer description
• peer mesh-group
• peer minimum-ttl