R2511-HP MSR Router Series IP Multicast Command Reference(V5)

192
Keywords Function
detail-suppressed
Does not suppress the summary route, but it suppresses the
advertisement of all the more specific routes. To summarize only some
specific routes, use the peer filter-policy command.
suppress-policy
Used to create a summary route and suppress the advertisement of
some summarized routes. If you want to suppress some routes
selectively and leave other routes still advertised, use the if-match
clause of the route-policy command.
origin-policy
Selects only routes that meet the routing policy for route
summarization.
attribute-policy
Sets attributes, except the AS-PATH attribute, for the summary route.
You accomplish the same task by using the peer route-policy
command.
Examples
# In IPv4 MBGP address family view, create a summary of 192.213.0.0/16 in the IPv4 MBGP routing
table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] aggregate 10.40.0.0 255.255.0.0
balance (MBGP address family view)
Use balance to configure the number of MBGP routes for load balancing.
Use undo balance to restore the default.
Syntax
balance number
undo balance
Default
No load balancing is configured.
Views
IPv4 MBGP address family view
Default command level
2: System level
Parameters
number: Specifies the number of MBGP routes for load balancing, in the range of 1 to 8. When it is set
to 1, load balancing is disabled.
Usage guidelines
MBGP has no explicit metric for implementing load balancing. Instead, it implements load balancing by
using route selection rules.