R2511-HP MSR Router Series IP Multicast Command Reference(V5)

193
Examples
# In IPv4 MBGP address family view, set the number of routes for BGP load balancing to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] balance 2
Related commands
display ip multicast routing-table
bestroute as-path-neglect (MBGP address family view)
Use bestroute as-path-neglect to configure MBGP not to consider AS_PATH during best route selection.
Use undo bestroute as-path-neglect to restore the default.
Syntax
bestroute as-path-neglect
undo bestroute as-path-neglect
Default
MBGP considers AS_PATH during best route selection.
Views
IPv4 MBGP address family view
Default command level
2: System level
Examples
# In IPv4 MBGP address family view, configure BGP to ignore AS_PATH during best route selection.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] bestroute as-path-neglect
bestroute compare-med (MBGP address family view)
Use bestroute compare-med to enable the comparison of the MED for paths from each AS during best
route selection.
Use undo bestroute compare-med to disable this comparison.
Syntax
bestroute compare-med
undo bestroute compare-med
Default
The comparison is not enabled.
Views
IPv4 MBGP address family view