R2511-HP MSR Router Series IP Multicast Command Reference(V5)

203
Parameters
group-name: Specifies an MBGP peer group by its name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the information of the IPv4 MBGP peer group aaa.
<Sysname> display bgp multicast group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.1 200 0 0 0 0 00:00:35 Active
Table 42 Command output
Field Description
BGP peer-group Name of the peer group.
Remote AS AS number of the peer group.
Type Type of the peer group: IBGP or EBGP.
Maximum allowed prefix number Maximum allowed prefix number.
Threshold
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer group;
If the percentage is reached, the system generates alarm
messages.
Configured hold timer value Holdtime interval.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval for route advertisement.
Peer Preferred Value Preferred value specified for the routes from the peer.
No routing policy is configured No routing policy is configured.