R2511-HP MSR Router Series IP Multicast Command Reference(V5)

13
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the information on the public
network.
Examples
# Display the IGMP SSM mappings for multicast group 232.1.1.1 on the public network.
<Sysname> display igmp ssm-mapping 232.1.1.1
VPN-Instance: public net
Group: 232.1.1.1
Source list:
1.2.3.4
5.5.5.5
10.1.1.1
100.1.1.10
Table 8 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
Group Multicast group address.
Source list List of multicast source addresses.
Related commands
ssm-mapping
display igmp ssm-mapping group
Use display igmp ssm-mapping group to display the multicast group information created based on the
configured IGMP SSM mappings.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] ssm-mapping group [ group-address |
interface interface-type interface-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.