R2511-HP MSR Router Series IP Multicast Command Reference(V5)

254
Field Description
switch group Switch-group address received.
sender
BGP peer address of the PE device that sent the switch-group
information.
ref count Number of VPN multicast groups referenced by the switch-group.
active count
Number of active VPN multicast groups (multicast groups with
active receivers) referenced by the switch-group.
expire time
Remaining time of the VPN (S, G) entry referenced by the
switch-group.
Related commands
display multicast-domain vpn-instance switch-group send
display multicast-domain vpn-instance switch-group send
Use display multicast-domain vpn-instance switch-group send to display the switch-group information
sent by the specified VPN instance in the MD.
Syntax
display multicast-domain vpn-instance vpn-instance-name switch-group send [ group group-address |
reuse interval | vpn-source-address [ mask { mask-length | mask } ] | vpn-group-address [ mask
{ mask-length | mask } ] ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance-name: Name of an MPLS L3VPN instance, a case-sensitive string of 1 to 31 characters.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
reuse interval: Displays the information about switch-group reuses that took place during the specified
length of time in seconds. The value range of interval is 1 to 2147483647.
vpn-source-address: VPN multicast source address.
mask: Subnet mask of the specified VPN multicast source/group address, 255.255.255.255 by default.
mask-length: Mask length of the specified multicast source/group address, in the range of 0 to 32. The
system default is 32.
vpn-group-address: VPN multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.