R2511-HP MSR Router Series IP Multicast Command Reference(V5)

257
[Sysname-vpn-instance-mvpn] multicast-domain holddown-time 80
multicast-domain log switch-group-reuse
Use multicast-domain log switch-group-reuse to enable switch-group reuse logging.
Use undo multicast-domain log to disable switch-group reuse logging.
Syntax
multicast-domain log switch-group-reuse
undo multicast-domain log
Default
The switch-group reuse logging function is disabled.
Views
VPN instance view
Default command level
2: System level
Usage guidelines
This command cannot be configured without the previous share-MDT configuration in the VPN instance.
Examples
# Enable switch-group reuse logging in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast-domain log switch-group-reuse
multicast-domain share-group
Use multicast-domain share-group to configure a share-group address and associate an MTI with the
current VPN instance.
Use undo multicast-domain share-group to restore the default.
Syntax
multicast-domain share-group group-address binding mtunnel mtunnel-number
undo multicast-domain share-group
Default
No share-group address is configured and no MTI is associated with a VPN instance.
Views
VPN instance view
Default command level
2: System level
Parameters
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
mtunnel-number: Number of the MTI interface to be created. The value range is 0 to 12.