R2511-HP MSR Router Series IP Multicast Command Reference(V5)

260
Examples
# Configure the address range of the switch-group-pool in VPN instance mvpn as 225.2.2.0 to
225.2.2.15.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast-domain switch-group-pool 225.2.2.0 28
Related commands
multicast-domain switch-delay
peer enable (BGP-MDT sub-address family view)
Use peer enable to enable the specified peer or peer group.
Use undo peer enable to disable the specified peer or peer group.
Syntax
peer { group-name | ip-address } enable
undo peer { group-name | ip-address } enable
Default
No BGP MDT peer or peer group is enabled.
Views
BGP-MDT sub-address family view
Default command level
2: System level
Parameters
group-name: Name of a BGP MDT peer group, a case-sensitive string of 1 to 47 characters. A peer
group name must not contain any space.
ip-address: IP address of a BGP MDT peer.
Usage guidelines
The BGP peer or peer group must be configured before this command can take effect.
Examples
# Configure and enable the BGP MDT peer 18.10.0.9.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 as-number 100
[Sysname-bgp] ipv4-family mdt
[Sysname-bgp-af-mdt] peer 18.10.0.9 enable
Related commands
• group
• peer as-number
• peer group (Layer 3—IP Routing Command Reference)