R2511-HP MSR Router Series IP Multicast Command Reference(V5)

269
Table 60 Command output
Field Descri
p
tion
Ethernet1/1(1::1) Interface and IPv6 address.
(::, FF1E::101) (S, G) entry, where double colons (::) means all IPv6 multicast sources.
Host Host IPv6 address.
Uptime Host running duration.
Expires Host expiration time, where "timeout" means that the host has expired.
display mld host port-info
Use display mld host port-info to display information about the hosts tracked by MLD on the Layer 2
ports.
Syntax
display mld host port-info vlan vlan-id group ipv6-group-address [ source ipv6-source-address ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vlan vlan-id: Specifies a VLAN, where vlan-id is in the range of 1 to 4094.
group ipv6-group-address: Specifies an IPv6 multicast group. The value of ipv6-group-address is in the
range of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent
any hexadecimal numbers from 0 to F.
source ipv6-source-address: Specifies an IPv6 multicast source.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X MSR20-1X MSR20 MSR30 MSR50 MSR1000
display mld host
port-info
No. Yes. No. Yes. Yes. Yes. Yes.