R2511-HP MSR Router Series IP Multicast Command Reference(V5)

274
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies the prefix length of the multicast source or multicast group address. For a multicast
source address, this argument has an effective value range of 0 to 128. For a multicast group address,
it has an effective value range of 8 to 128. The system default is 128 in both cases.
flags: Specifies the route flag.
act: Displays the MLD routes with the ACT flag
suc: Displays the MLD routes with the SUC flag.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the MLD routing table.
<Sysname> display mld routing-table
Routing table
Total 2 entries
00001. (*, FF1E::101)
List of 1 downstream interface
Ethernet1/1 (FE80::200:5EFF:FE71:3800),
Protocol: MLD
00002. (100::1, FF1E::101), Flag: ACT
List of 1 downstream interface in include mode
Ethernet1/2 (FE80::100:5E16:FEC0:1010),
Protocol: MLD
Table 64 Command output
Field Descri
p
tion
Routing table MLD routing table.
00001 Sequence number of this (*, G) entry.
(*, FF1E::101) (*, G) entry in the MLD routing table.