R2511-HP MSR Router Series IP Multicast Command Reference(V5)

287
mld max-response-time
Use mld max-response-time to configure the maximum response time for MLD general query messages
on the interface.
Use undo mld max-response-time to restore the default.
Syntax
mld max-response-time interval
undo mld max-response-time
Default
The maximum response delay for MLD general query messages is 10 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies the maximum response time for MLD general query messages in seconds. The value
range is 1 to 25.
Usage guidelines
The maximum response time determines the time which the device takes to detect directly attached group
members in the LAN.
Examples
# Set the maximum response delay for MLD general query messages to 8 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mld max-response-time 8
Related commands
• display mld interface
• max-response-time
• mld timer other-querier-present
mld proxying enable
Use mld proxying enable to enable MLD proxying on an interface.
Use undo mld proxying enable to disable MLD proxying on the interface.
Syntax
mld proxying enable
undo mld proxying enable
Default
MLD proxying is disabled.