R2511-HP MSR Router Series IP Multicast Command Reference(V5)

291
Related commands
• mld require-router-alert
• send-router-alert
mld ssm-mapping enable
Use mld ssm-mapping enable to enable the MLD SSM mapping feature on the current interface.
Use undo mld ssm-mapping enable to disable the MLD SSM mapping feature on the current interface.
Syntax
mld ssm-mapping enable
undo mld ssm-mapping enable
Default
The MLD SSM mapping feature is disabled on all interfaces.
Views
Interface view
Default command level
2: System level
Examples
# Enable the MLD SSM mapping feature on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mld ssm-mapping enable
mld startup-query-count
Use mld startup-query-count to configure the startup query count on the current interface.
Use undo mld startup-query-count to restore the default.
Syntax
mld startup-query-count value
undo mld startup-query-count
Default
The startup query count is set to the MLD querier's robustness variable.
Views
Interface view
Default command level
2: System level
Parameters
value: Specifies a startup query count, namely, the number of queries that the MLD querier sends on
startup. The value range is 2 to 5.