R2511-HP MSR Router Series IP Multicast Command Reference(V5)

294
Default
MLD other querier present interval = [ MLD query interval ] × [ MLD querier's robustness variable ] +
[ maximum response delay for MLD general queries ] /2.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD other querier present interval in seconds, in the range of 60 to 300.
Examples
# Set the MLD other querier present interval to 200 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mld timer other-querier-present 200
Related commands
• display mld interface
• mld max-response-time
• mld robust-count
• mld timer query
• timer other-querier-present
mld timer query
Use mld timer query to configure the MLD query interval on the current interface.
Use undo mld timer query to restore the default.
Syntax
mld timer query interval
undo mld timer query
Default
The MLD query interval is 125 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an MLD query interval in seconds, namely, the time between MLD general query
messages. The value range is 1 to 18,000.
Examples
# Set the MLD query interval to 200 seconds on Ethernet 1/1.