R2511-HP MSR Router Series IP Multicast Command Reference(V5)

323
Field Descri
p
tion
PIM override interval (configured) Configured prune override interval.
PIM neighbor tracking (negotiated) Whether neighbor tracking is enabled by negotiation.
PIM neighbor tracking (configured)
Whether neighbor tracking is enabled by
configuration.
PIM generation ID Generation_ID value.
PIM require generation ID
Whether rejection of Hello messages without
Generation_ID is enabled.
PIM hello hold interval IPv6 PIM neighbor timeout timer.
PIM assert hold interval Assert timeout timer.
PIM triggered hello delay Maximum delay of sending hello messages.
PIM J/P interval Join/prune interval.
PIM J/P hold interval Join/prune timeout timer.
PIM BSR domain border Whether PIM domain border is enabled.
Number of routers on network not using DR priority
Number of routers not using the DR priority field on the
subnet where the interface resides.
Number of routers on network not using LAN delay
Number of routers not using the LAN delay field on the
subnet where the interface resides.
Number of routers on network not using neighbor
tracking
Number of routers not using neighbor tracking on the
subnet where the interface resides.
display pim ipv6 join-prune
Use the display ipv6 pim join-prune command to display information about the join/prune messages to
send.
Syntax
display pim ipv6 join-prune mode { sm [ flags flag-value ] | ssm } [ interface interface-type
interface-number | neighbor ipv6-neighbor-address ] * [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
mode: Displays the information of join/prune messages to send in the specified IPv6 PIM mode. IPv6 PIM
modes include sm and ssm, which represent IPv6 PIM-SM and IPv6 PIM-SSM, respectively.
flags flag-value: Displays IPv6 PIM routing entries containing the specified flag or flags. The values and
meanings of flag-value are as follows:
• rpt: Specifies routing entries on the RPT.
• spt: Specifies routing entries on the SPT.
• wc: Specifies wildcard routing entries.