R2511-HP MSR Router Series IP Multicast Command Reference(V5)

326
Field Descri
p
tion
Mode
Mode of the IPv6 PIM neighbor, where B means IPv6 BIDIR-PIM
mode, and if this field is blank, it means non-IPv6 BIDIR-PIM mode.
Generation ID
Generation ID of the IPv6 PIM neighbor (a random value indicating
status change of the IPv6 PIM neighbor).
Holdtime
Holdtime of the IPv6 PIM neighbor; "forever" means that the IPv6
PIM neighbor is always up and reachable.
LAN delay Prune message delay.
Override interval Prune override interval.
State refresh interval
Interval for sending state refresh messages.
Displayed only when the IPv6 PIM neighbor operates in IPv6
PIM-DM mode and state refresh capability is enabled.
Neighbor tracking Whether neighbor tracking is enabled.
Bidirectional PIM Whether IPv6 BIDIR-PIM is enabled.
Neighbor Secondary Address(es)
Secondary IPv6 address of the PIM neighbor (non-link-local
address).
display pim ipv6 routing-table
Use display pim ipv6 routing-table to display IPv6 PIM routing table information.
Syntax
display pim ipv6 routing-table [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | incoming-interface [ interface-type interface-number | register ] | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register } | mode mode-type | flags
flag-value | fsm ] * [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16, where
x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the prefix length of the IPv6 multicast group/source address prefix. For an IPv6
multicast group address, the effective range is 8 to 128 and the default value is 128. For an IPv6 multicast
source address, the effective range is 0 to 128 and the default value is 128.
incoming-interface: Specifies an incoming interface.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is sm.
outgoing-interface: Specifies an outgoing interface.