R2511-HP MSR Router Series IP Multicast Command Reference(V5)

327
include: Specifies an interface in the outgoing interface list.
exclude: Specifies an interface not in the outgoing interface list.
match: Specifies an interface that only exists in the outgoing interface list.
mode mode-type: Specifies an IPv6 PIM mode, where mode-type can have the following values:
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
• ssm: Specifies IPv6 PIM-SSM.
flags flag-value: Specifies a flag. The values of flag-value and their meanings are as follows:
• act: Specifies IPv6 multicast routing entries that have been used for routing data.
• bidir: Specifies IPv6 multicast routing entries created by IPv6 BIDIR-PIM.
• del: Specifies IPv6 multicast routing entries scheduled to be deleted.
• exprune: Specifies multicast routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
• ext: Specifies IPv6 routing entries containing outgoing interfaces provided by other IPv6 multicast
routing protocols.
• loc: Specifies IPv6 multicast routing entries on that devices that directly connect to the same subnet
as the IPv6 multicast source.
• niif: Specifies IPv6 multicast routing entries containing unknown incoming interfaces.
• nonbr: Specifies routing entries with IPv6 PIM neighbor searching failure.
• rpt: Specifies routing entries on RPT branches where (S, G) prunes have been sent to the RP.
• spt: Specifies routing entries on the SPT.
• swt: Specifies routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies wildcard routing entries.
fsm: Displays the information of the state machine.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IPv6 PIM routing table information.
<Sysname> display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(2001::2, FFE3::101)
RP: FE80::A01:100:1
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Ethernet1/1
Upstream neighbor: NULL