R2511-HP MSR Router Series IP Multicast Command Reference(V5)

329
Field Descri
p
tion
Flag
Flag of the (S, G) or (*, G) entry in the IPv6 PIM routing table:
• ACT—The entry has been used for routing data.
• BIDIR—The entry was created by IPv6 BIDIR-PIM.
• DEL—The entry will be removed.
• EXPRUNE—Some outgoing interfaces are pruned by other IPv6
multicast routing protocols.
• EXT—The entry contains outgoing interfaces provided by other IPv6
multicast routing protocols.
• LOC—The entry is on a router directly connected to the same subnet
with the IPv6 multicast source.
• NIIF—The entry contains unknown incoming interfaces.
• NONBR—The entry has an IPv6 PIM neighbor searching failure.
• RPT—The entry is on a RPT branch where (S, G) prunes have been
sent to the RP.
• SPT—The entry is on the SPT.
• SWT—The entry is in the process of RPT-to-SPT switchover.
• WC—Wildcard routing entry.
Uptime Length of time since the (S, G) or (*, G) entry was installed.
Upstream interface Upstream (incoming) interface of the (S, G) or (*, G) entry.
Upstream neighbor Upstream neighbor of the (S, G) or (*, G) entry.
RPF prime neighbor
RPF neighbor of the (S, G) or (*, G) entry:
• For a (*, G) entry, if this router is the RP, the RPF neighbor of this (*,
G) entry is NULL.
• For a (S, G) entry, if this router directly connects to the IPv6 multicast
source, the RPF neighbor of this (S, G) entry is NULL.
Downstream interface(s) information
Information about the downstream interfaces:
• Number of downstream interfaces.
• Downstream interface name.
• Protocol type configured on the downstream interface.
• Uptime of the downstream interfaces.
• Expiration time of the downstream interfaces.
Related commands
display ipv6 multicast routing-table
display pim ipv6 rp-info
Use display pim ipv6 rp-info to display RP information.
Syntax
display pim ipv6 rp-info [ ipv6-group-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view