R2511-HP MSR Router Series IP Multicast Command Reference(V5)

333
hello-option lan-delay (IPv6 PIM view)
Use hello-option lan-delay to configure the global value of the LAN-delay time (namely, the period of
time that the device waits before it forwards a received prune message).
Use undo hello-option lan-delay to restore the default.
Syntax
hello-option lan-delay interval
undo hello-option lan-delay
Default
The LAN-delay time is 500 milliseconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a LAN-delay time in milliseconds. The value range is 1 to 32,767.
Examples
# Set the LAN-delay to 200 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option lan-delay 200
Related commands
• hello-option override-interval
• pim ipv6 hello-option lan-delay
• pim ipv6 hello-option override-interval
hello-option neighbor-tracking (IPv6 PIM view)
Use hello-option neighbor-tracking to globally disable join suppression (namely, enable neighbor
tracking).
Use undo hello-option neighbor-tracking to enable join suppression.
Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
Default
Join suppression is enabled, and neighbor tracking is disabled.
Views
IPv6 PIM view