R2511-HP MSR Router Series IP Multicast Command Reference(V5)

335
Syntax
holdtime assert interval
undo holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value range is 7 to 2147483647.
Examples
# Set the global value of the assert timeout timer to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100
Related commands
• holdtime join-prune
• pim ipv6 holdtime assert
• pim ipv6 holdtime join-prune
holdtime join-prune (IPv6 PIM view)
Use holdtime join-prune to configure the global value of the join/prune timeout timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune interval
undo holdtime join-prune
Default
The join/prune timeout timer is 210 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a join/prune timeout timer in seconds. The value range is 1 to 65535.
Examples
# Set the global value of the join/prune timeout timer to 280 seconds.
<Sysname> system-view