R2511-HP MSR Router Series IP Multicast Command Reference(V5)

338
Examples
# Enable IPv6 multicast routing and enter IPv6 PIM view.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] pim ipv6
[Sysname-pim6]
Related commands
multicast ipv6 routing-enable
pim ipv6 bfd enable
Use pim ipv6 bfd enable to enable IPv6 PIM to work with Bidirectional Forwarding Detection (BFD).
Use undo pim ipv6 bfd enable to disable this feature.
Syntax
pim ipv6 bfd enable
undo pim ipv6 bfd enable
Default
This feature is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
You must enable IPv6 PIM-DM or IPv6 PIM-SM on an interface before you configure this feature on the
interface. Otherwise, this feature does not take effect.
Examples
# Enable IPv6 multicast routing on the public network, enable IPv6 PIM-SM on interface Ethernet 1/1,
and enable IPv6 PIM to work with BFD on the interface.
<Sysname> system-view
[Sysname] multicast ipv6 routing-enable
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim ipv6 sm
[Sysname-Ethernet1/1] pim ipv6 bfd enable
Related commands
• pim ipv6 dm
• pim ipv6 sm
pim ipv6 bsr-boundary
Use pim ipv6 bsr-boundary to configure an IPv6 PIM domain border, namely, a bootstrap message
boundary.
Use undo pim ipv6 bsr-boundary to remove the configured IPv6 PIM domain border.