R2511-HP MSR Router Series IP Multicast Command Reference(V5)

345
Examples
# Configure a legal source address range for hello messages on Ethernet 1/1 so that only the devices on
the FE80:101::101/64 subnet can become PIM neighbors of this router.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source fe80:101::101 64
[Sysname-acl6-basic-2000] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim ipv6 neighbor-policy 2000
pim ipv6 require-genid
Use the pim ipv6 require-genid command enable rejection of hello messages without Generation_ID.
Use undo pim ipv6 require-genid to restore the default.
Syntax
pim ipv6 require-genid
undo pim ipv6 require-genid
Default
Hello messages without Generation_ID are accepted.
Views
Interface view
Default command level
2: System level
Examples
# Configure Ethernet 1/1 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pim ipv6 require-genid
pim ipv6 sm
Use pim ipv6 sm to enable IPv6 PIM-SM.
Use undo pim ipv6 sm to disable IPv6 PIM-SM.
Syntax
pim ipv6 sm
undo pim ipv6 sm
Default
IPv6 PIM-SM is disabled.
Views
Interface view