R2511-HP MSR Router Series IP Multicast Command Reference(V5)

23
Use undo igmp last-member-query-interval to restore the default.
Syntax
igmp last-member-query-interval interval
undo igmp last-member-query-interval
Default
The IGMP last-member query interval is 1 second.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an IGMP last-member query interval in seconds. The value range is 1 to 5.
Examples
# Set the IGMP last-member query interval to 3 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] igmp last-member-query-interval 3
Related commands
• display igmp interface
• igmp robust-count
• last-member-query-interval
igmp max-response-time
Use igmp max-response-time to configure the maximum response time for IGMP general queries on the
current interface.
Use undo igmp max-response-time to restore the default.
Syntax
igmp max-response-time interval
undo igmp max-response-time
Default
The maximum response time for IGMP general queries is 10 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies the maximum response time in seconds for IGMP general queries. The value range is
1 to 25.