Manualshelf

R2511-HP MSR Router Series IP Multicast Command Reference(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
361362363364365366367368369370
351
Related commands
register-suppression-timeout
register-suppression-timeout (IPv6 PIM view)
Use register-suppression-timeout to configure the register suppression time.
Use undo register-suppression-timeout to restore the default.
Syntax
register-suppression-timeout interval
undo register-suppression-timeout
Default
The register suppression time is 60 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a register suppression time in seconds, in the range of 1 to 65535.
Examples
# Set the register suppression time to 70 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] register-suppression-timeout 70
Related commands
• probe-interval
• register-policy
register-whole-checksum (IPv6 PIM view)
Use register-whole-checksum to configure the router to calculate the checksum based on the entire
register message.
Use undo register-whole-checksum to restore the default.
Syntax
register-whole-checksum
undo register-whole-checksum
Default
The checksum is calculated based only on the header in the register message.
Views
IPv6 PIM view