R2511-HP MSR Router Series IP Multicast Command Reference(V5)

366
Field Descri
p
tion
Total 1 RP Total number of RPs.
Total 1 RP matched Total number of matched RPs.
00001 Sequence number of the RP.
MID ID of the RP. Each RP has a unique MID.
Flags
Current state of the RP. Different bits indicate different states of an RP.
Major values of this field are described in Table 80 and Table 81.
Uptime Length of time for which the RP has been up, in the format hh:mm:ss.
RPF interface RPF interface to the RP.
List of 1 DF interfaces DF interface list.
display multicast ipv6 minimum-hoplimit
Use display multicast ipv6 minimum-hoplimit to view the minimum hop limit required for an IPv6
multicast packet to be forwarded on the specified interface or all interfaces.
Syntax
display multicast ipv6 minimum-hoplimit [ interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command will display the minimum hop limit required for an IPv6 multicast packet to be
forwarded on all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the minimum hop limit required for an IPv6 multicast packet to be forwarded on all interfaces.
<Sysname> display multicast ipv6 minimum-hoplimit
IPv6 multicast Hop Limit information
Interface Hop Limit
Eth1/1 5
Eth1/2 6