R2511-HP MSR Router Series IP Multicast Command Reference(V5)

367
Table 83 Command output
Field Descri
p
tion
IPv6 multicast Hop Limit information
Minimum hop limit value required for IPv6 multicast
traffic to be forwarded.
Interface Interface name.
Hop Limit
Minimum hop limit value required for an IPv6 multicast
packet to be forwarded on the interface.
Related commands
multicast ipv6 minimum-hoplimit
display multicast ipv6 routing-table
Use display multicast ipv6 routing-table to display information about the IPv6 multicast routing table.
Syntax
display multicast ipv6 routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface
{ exclude | include | match } { interface-type interface-number | register } ] * [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where x and y
represent any hexadecimal numbers from 0 to F.
prefix-length: Specifies the prefix length of a multicast group address or an IPv6 multicast source address.
For an IPv6 multicast group address, this argument has an effective value range of 8 to 128. For an IPv6
multicast source address, this argument has an effective value range of 0 to 128. The system default is
128 i n b o t h ca se s .
incoming-interface: Displays the routing entries, where the incoming interface is the specified one.
interface-type interface-number: Specifies an interface by its name and number.
register: Represents a registered interface.
outgoing-interface: Displays the routing entries, where the outgoing interface is the specified one.
exclude: Displays the routing entries, where the outgoing interface list excludes the specified interface.
include: Displays the routing entries, where the outgoing interface list includes the specified interface.
match: Displays the routing entries, where the outgoing interface list includes only the specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.