R2511-HP MSR Router Series IP Multicast Command Reference(V5)

372
multicast ipv6 forwarding-table route-limit
Use multicast ipv6 forwarding-table route-limit to configure the maximum number of entries in the IPv6
multicast forwarding table.
Use undo multicast ipv6 forwarding-table route-limit to restore the default.
Syntax
multicast ipv6 forwarding-table route-limit limit
undo multicast ipv6 forwarding-table route-limit
Default
The maximum number of entries in the IPv6 multicast forwarding table is the maximum number allowed
by the system.
Views
System view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of entries in the IPv6 multicast forwarding table. The value range is
0 to the allowable maximum number.
Usage guidelines
The following matrix shows the command and MSR router compatibility:
Command MSR900 MSR93X
MSR20-1
X
MSR20 MSR30 MSR50
MSR100
0
multicast ipv6
forwarding-ta
ble route-limit
Value
range for
limit: 0 to
900
(default).
Value
range for
limit: 0 to
900
(default).
Value
range for
limit: 0 to
900
(default).
Value
range for
limit: 0 to
900
(default).
Value
range for
limit: 0 to
1024
(default).
Value
range for
limit: 0 to
1024
(default).
Value
range for
limit: 0 to
900
(default).
Examples
# Set the maximum number of entries in the IPv6 multicast forwarding table to 200.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table route-limit 200
Related commands
display multicast ipv6 forwarding-table
multicast ipv6 load-splitting
Use multicast ipv6 load-splitting to enable load splitting of IPv6 multicast traffic.
Use undo multicast ipv6 load-splitting to disable load splitting of IPv6 multicast traffic.
Syntax
multicast ipv6 load-splitting {source | source-group }