R2511-HP MSR Router Series IP Multicast Command Reference(V5)

374
Syntax
multicast ipv6 minimum-hoplimit hoplimit-value
undo multicast ipv6 minimum-hoplimit
Default
The minimum hop limit required for an IPv6 multicast packet to be forwarded is 1.
Views
Interface view
Default command level
2: System level
Parameters
hoplimit-value: Minimum hop limit required for an IPv6 multicast packet to be forwarded on the interface,
in the range of 1 to 255.
Examples
# Set the minimum hop limit required for an IPv6 multicast packet to be forwarded to 8 on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] multicast ipv6 minimum-hoplimit 8
Related commands
display multicast ipv6 minimum-hoplimit
multicast ipv6 routing-enable
Use multicast ipv6 routing-enable to enable IPv6 multicast routing.
Use undo multicast ipv6 routing-enable to disable IPv6 multicast routing.
Syntax
multicast ipv6 routing-enable
undo multicast ipv6 routing-enable
Default
IPv6 multicast routing is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
You must enable IPv6 multicast routing before you can execute other Layer 3 IPv6 multicast commands.
The device does not forward any IPv6 multicast packets before IPv6 multicast routing is enabled.
Examples
# Enable IPv6 multicast routing.
<Sysname> system-view