R2511-HP MSR Router Series IP Multicast Command Reference(V5)

380
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics for all MLD messages learned through MLD snooping.
<Sysname> display mld-snooping statistics
Received MLD general queries:0.
Received MLDv1 specific queries:0.
Received MLDv1 reports:0.
Received MLD dones:0.
Sent MLDv1 specific queries:0.
Received MLDv2 reports:0.
Received MLDv2 reports with right and wrong records:0.
Received MLDv2 specific queries:0.
Received MLDv2 specific sg queries:0.
Sent MLDv2 specific queries:0.
Sent MLDv2 specific sg queries:0.
Received error MLD messages:0.
Table 88 Command output
Field Descri
p
tion
general queries General query messages.
specific queries Multicast-address-specific query messages.
reports Report messages.
dones Done messages.
reports with right and wrong records Reports the contained correct and incorrect records.
specific sg queries Multicast-address-and-source-specific queries.
dot1p-priority (MLD-snooping view)
Use dot1p-priority to set the 802.1p precedence for MLD messages globally.
Use undo dot1p-priority to restore the default.