R2511-HP MSR Router Series IP Multicast Command Reference(V5)

381
Syntax
dot1p-priority priority-number
undo dot1p-priority
Default
The default 802.1p precedence for MLD messages is 0.
Views
MLD-snooping view
Default command level
2: System level
Parameters
priority-number: Specifies an 802.1p precedence for MLD messages, in the range of 0 to 7. A higher
value means a higher precedence.
Usage guidelines
This command also takes effect on VLANs with MLD enabled on their VLAN interfaces.
Examples
# Set the 802.1p precedence for MLD messages to 3 globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] dot1p-priority 3
drop-unknown (MLD-snooping view)
Use drop-unknown to enable dropping unknown IPv6 multicast data globally.
Use undo drop-unknown to disable dropping unknown IPv6 multicast data globally.
Syntax
drop-unknown
undo drop-unknown
Default
This function is disabled, and unknown IPv6 multicast data is flooded in the VLAN.
Views
MLD-snooping view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and MSR router compatibility: