R2511-HP MSR Router Series IP Multicast Command Reference(V5)

384
Examples
# Apply ACL 2000 as an IPv6 multicast group filter so that hosts in VLAN 2 can join FF03::101 only.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source ff03::101 16
[Sysname-acl6-basic-2000] quit
[Sysname] mld-snooping
[Sysname-mld-snooping] group-policy 2000 vlan 2
Related commands
mld-snooping group-policy
host-aging-time (MLD-snooping view)
Use host-aging-time to configure the aging timer for the dynamic member ports globally.
Use undo host-aging-time to restore the default.
Syntax
host-aging-time interval
undo host-aging-time
Default
The aging timer of the dynamic member ports is 260 seconds.
Views
MLD-snooping view
Default command level
2: System level
Parameters
interval: Specifies an aging timer in seconds for the dynamic member ports. The value range is 200 to
1000.
Examples
# Set the aging timer for the dynamic member ports to 300 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] host-aging-time 300
Related commands
mld-snooping host-aging-time
host-tracking (MLD-snooping view)
Use host-tracking to enable the MLD snooping host tracking function globally.
Use undo host-tracking to disable the MLD snooping host tracking function globally.
Syntax
host-tracking