R2511-HP MSR Router Series IP Multicast Command Reference(V5)

386
Related commands
mld-snooping last-listener-query-interval
max-response-time (MLD-snooping view)
Use max-response-time to configure the maximum response delay for MLD general queries globally.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval
undo max-response-time
Default
The maximum response delay for MLD general queries is 10 seconds.
Views
MLD-snooping view
Default command level
2: System level
Parameters
interval: Specifies the maximum response delay in seconds for MLD general queries. The value range is
1 to 25.
Examples
# Set the maximum response delay for MLD general queries to 5 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
Related commands
• mld-snooping max-response-time
• mld-snooping query-interval
mld-snooping
Use mld-snooping to enable MLD snooping globally and enter MLD-snooping view.
Use undo mld-snooping to disable MLD snooping globally.
Syntax
mld-snooping
undo mld-snooping
Default
MLD snooping is disabled.
Views
System view