R2511-HP MSR Router Series IP Multicast Command Reference(V5)

397
mld-snooping last-listener-query-interval
Use mld-snooping last-listener-query-interval to set the MLD last-listener query interval for a VLAN.
Use undo mld-snooping last-listener-query-interval to restore the default.
Syntax
mld-snooping last-listener-query-interval interval
undo mld-snooping last-listener-query-interval
Default
The MLD last-listener query interval is 1 second.
Views
VLAN view
Default command level
2: System level
Parameters
interval: Sets the MLD last-listener query interval in seconds. The value range is 1 to 5.
Usage guidelines
The MLD last-listener query interval determines the interval for sending MLD multicast-address-specific
queries and the maximum response delay for MLD multicast-address-specific queries in a VLAN.
You must enable MLD snooping for a VLAN before you execute this command for the VLAN.
Examples
# Enable MLD snooping and set the MLD last-listener query interval to 3 seconds for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping last-listener-query-interval 3
Related commands
• last-listener-query-interval
• mld-snooping enable
mld-snooping max-response-time
Use mld-snooping max-response-time to set the maximum response delay for MLD general queries in the
VLAN.
Use undo mld-snooping max-response-time to restore the default.
Syntax
mld-snooping max-response-time interval
undo mld-snooping max-response-time