R2511-HP MSR Router Series IP Multicast Command Reference(V5)

398
Default
The maximum response delay for MLD general queries is 10 seconds.
Views
VLAN view
Default command level
2: System level
Parameters
interval: Specifies the maximum response delay in seconds for MLD general queries. The value range is
1 to 25.
Usage guidelines
You must enable MLD snooping for a VLAN before you execute this command for the VLAN.
Examples
# Enable MLD snooping and set the maximum response delay for MLD general queries to 5 seconds in
VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping max-response-time 5
Related commands
• max-response-time
• mld-snooping enable
• mld-snooping query-interval
mld-snooping overflow-replace
Use mld-snooping overflow-replace to enable the IPv6 multicast group replacement function on a port.
Use undo mld-snooping overflow-replace to disable the IPv6 multicast group replacement function on a
port.
Syntax
mld-snooping overflow-replace [ vlan vlan-list ]
undo mld-snooping overflow-replace [ vlan vlan-list ]
Default
The IPv6 multicast group replacement function is disabled.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view, port group view
Default command level
2: System level