R2511-HP MSR Router Series IP Multicast Command Reference(V5)

404
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mld-snooping router-port-deny vlan 2
mld-snooping source-deny
Use mld-snooping source-deny to enable IPv6 multicast source port filtering.
Use undo mld-snooping source-deny to disable IPv6 multicast source port filtering.
Syntax
mld-snooping source-deny
undo mld-snooping source-deny
Default
IPv6 multicast source port filtering is disabled.
Views
Layer 2 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
For a device that supports both MLD snooping and MLD, this command also takes effect on VLANs with
MLD enabled on their VLAN interfaces.
Examples
# Enable source port filtering for IPv6 multicast data on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mld-snooping source-deny
mld-snooping special-query source-ip
Use mld-snooping special-query source-ip to configure the source IPv6 address of MLD
multicast-address-specific queries.
Use undo mld-snooping special-query source-ip to restore the default.
Syntax
mld-snooping special-query source-ip { ipv6-address | current-interface }
undo mld-snooping special-query source-ip
Default
The source IPv6 address of MLD multicast-address-specific queries is FE80::02FF:FFFF:FE00:0001.
Views
VLAN view
Default command level
2: System level