R2511-HP MSR Router Series IP Multicast Command Reference(V5)

407
Examples
# Configure Ethernet 1/1 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mld-snooping static-router-port vlan 2
mld-snooping version
Use mld-snooping version to specify the version of MLD snooping.
Use undo mld-snooping version to restore the default.
Syntax
mld-snooping version version-number
undo mld-snooping version
Default
The MLD snooping version is MLDv1.
Views
VLAN view
Default command level
2: System level
Parameters
version-number: Specifies an MLD snooping version in the range of 1 to 2.
Usage guidelines
This command can take effect only if MLD snooping is enabled in the VLAN.
Examples
# Enable MLD snooping and specify MLDv2 snooping in VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
Related commands
mld-snooping enable
overflow-replace (MLD-snooping view)
Use overflow-replace to enable the IPv6 multicast group replacement function globally.
Use undo overflow-replace to disable the IPv6 multicast group replacement function globally.
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]