R2511-HP MSR Router Series IP Multicast Command Reference(V5)

409
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] undo report-aggregation
reset mld-snooping group
Use reset mld-snooping group to remove the dynamic group entries of a specified MLD snooping group.
Syntax
reset mld-snooping group { ipv6-group-address | all } [ vlan vlan-id ]
Views
User view
Default command level
2: System level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group. The value range for the ipv6-group-address
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::), where x and y represent
any hexadecimal numbers from 0 to F.
all: Specifies all IPv6 multicast groups.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
Usage guidelines
This command cannot remove the static group entries of MLD snooping groups.
Examples
# Remove the dynamic group entries of all MLD snooping groups.
<Sysname> reset mld-snooping group all
reset mld-snooping statistics
Use reset mld-snooping statistics to clear statistics for the MLD messages learned through MLD snooping.
Syntax
reset mld-snooping statistics
Views
User view
Default command level
2: System level
Examples
# Clear the statistics for all MLD messages learned through MLD snooping.
<Sysname> reset mld-snooping statistics
router-aging-time (MLD-snooping view)
Use router-aging-time to set the aging timer for the dynamic router ports globally.