R2511-HP MSR Router Series IP Multicast Command Reference(V5)

410
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The dynamic router port aging timer is 260 seconds.
Views
MLD-snooping view
Default command level
2: System level
Parameters
interval: Specifies an aging timer in seconds for the dynamic router ports. The value range is 1 to 1000.
Examples
# Set the aging timer for the dynamic router ports to 100 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] router-aging-time 100
Related commands
mld-snooping router-aging-time
source-deny (MLD-snooping view)
Use source-deny to enable IPv6 multicast source port filtering on a port to filter out all the received IPv6
multicast packets so that the port can connect to only IPv6 multicast receivers rather than to IPv6 multicast
sources.
Use undo source-deny to disable IPv6 multicast source port filtering.
Syntax
source-deny port interface-list
undo source-deny port interface-list
Default
IPv6 multicast source port filtering is disabled on a port, and the port can connect to both IPv6 multicast
sources and IPv6 multicast receivers.
Views
MLD-snooping view
Default command level
2: System level
Parameters
interface-list: Specifies a port list. You can specify multiple ports or port ranges by providing the this
argument in the form of interface-list = { interface-type interface-number [ to interface-type
interface-number ] }.