R2511-HP MSR Router Series IP Multicast Command Reference(V5)

414
Related commands
display ipv6 multicast routing-table
bestroute as-path-neglect (IPv6 MBGP address family view)
Use bestroute as-path-neglect to configure IPv6 MBGP not to consider the AS path during best route
selection.
Use undo bestroute as-path-neglect to configure IPv6 MBGP to consider the AS path during best route
selection.
Syntax
bestroute as-path-neglect
undo bestroute as-path-neglect
Default
IPv6 MBGP considers the AS path during best route selection.
Views
IPv6 MBGP address family view
Default command level
2: System level
Examples
# In IPv6 MBGP address family view, configure IPv6 MBGP to ignore AS path during best route selection.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]bestroute as-path-neglect
bestroute compare-med (IPv6 MBGP address family view)
Use bestroute compare-med to enable the comparison of the MED for paths from each AS.
Use undo bestroute compare-med to disable this comparison.
Syntax
bestroute compare-med
undo bestroute compare-med
Default
The comparison of the MED for paths from each AS is disabled.
Views
IPv6 MBGP address family view
Default command level
2: System level
Usage guidelines
After the bestroute compare-med command is used, the balance command will not take effect.