R2511-HP MSR Router Series IP Multicast Command Reference(V5)

31
igmp timer query
Use igmp timer query to configure the IGMP general query interval on the current interface.
Use undo igmp timer query to restore the default.
Syntax
igmp timer query interval
undo igmp timer query
Default
The IGMP general query interval is 60 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies an IGMP general query interval in seconds, namely, the interval between IGMP
general queries. The value range is 1 to 18,000.
Examples
# Set the IGMP general query interval to 125 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] igmp timer query 125
Related commands
• display igmp interface
• igmp timer other-querier-present
• timer query
igmp version
Use igmp version to configure the IGMP version on the current interface.
Use undo igmp version to restore the default IGMP version.
Syntax
igmp version version-number
undo igmp version
Default
The default IGMP version is version 2.
Views
Interface view
Default command level
2: System level