R2511-HP MSR Router Series IP Multicast Command Reference(V5)

446
Use undo peer capability-advertise orf to disable the ORF capability for the BGP peer or peer group.
Syntax
peer { group-name | ipv6-address } capability-advertise orf ipv6-prefix { both | receive | send }
undo peer { group-name | ipv6-address } capability-advertise orf ipv6-prefix { both | receive | send }
Default
The ORF capability is not enabled for a BGP peer or peer group.
Views
IPv6 address family view
Default command level
2: System level
Parameters
group-name: Specifies a peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies a peer by its IPv6 address.
both: Supports sending and receiving route-refresh messages carrying the ORF information.
receive: Supports receiving route-refresh messages carrying the ORF information.
send: Supports sending route-refresh messages carrying the ORF information.
Usage guidelines
• After you enable the ORF capability, the local BGP router negotiates the ORF capability with the
BGP peer through Open messages. After that, the BGP router can process route-refresh messages
carrying the standard ORF information from the peer or send route-refresh messages carrying the
standard ORF information to the peer. For non-standard ORF capability negotiation, you need also
to configure the peer capability-advertise orf non-standard command.
• After you disable the ORF capability, the local BGP router does not negotiate the ORF capability
with the specified peer or peer group.
Table 101 Description of the both, send, and receive parameters and the negotiation result
Local parameter Peer parameter Negotiation result
send
• receive
•
both
The ORF sending capability is enabled locally
and the ORF receiving capability is enabled on
the peer.
receive
• send
• both
The ORF receiving capability is enabled locally
and the ORF sending capability is enabled on
the peer.
both both
Both the ORF sending and receiving
capabilities are enabled locally and on the
peer.
Examples
# Enable the ORF capability for the BGP peer 1:2::3:4. Then, after negotiation, the local router can
exchange ORF information with the peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100